dcdc specification 6 watts ? 2:1 input range ? dip24 plastic case ? operating temperature 40 c to +100 c ? single & dual outputs ? optional metal case ? 1500 vdc isolation, 3000 vdc option ? 3 year warranty jce series input input voltage range ? 12 v (9-18 vdc) 24 v (18-36 vdc) 48 v (36-75 vdc) input current ? see table input filter ? pi network input reflected ripple ? 20 ma pk-pk through 12 h inductor and 4.7 f capacitor input surge ? 12 v models 25 vdc for 100 ms 24 v models 50 vdc for 100 ms 48 v models 100 vdc for 100 ms under voltage lockout ? 12 v models on >8.5 v, off <8.0 v 24 v models on >16.5 v, off <15.5 v 48 v models on >34.5 v, off <33.5 v output output voltage ? see table output voltage balance ? 2% max, dual output models initial set accuracy ? 2% max minimum load ? no minimum load required line regulation ? 0.5% max load regulation ? 1.2% max, for single output and 5% max for dual output from 10-100% cross regulation ? 5% max, on dual output models (see note 1) start up delay ? 20 ms typical ripple & noise ? 80 mv pk-pk (100 mv for d24 models), 20 mhz bandwidth. see note 2 transient response ? 3% max deviation, recovery to within 1% in 300 s for a 25% load change (4% max. deviation for s3v3 models) overload protection ? 135% - 185% of full load short circuit protection ? trip and restart (hiccup mode), auto recovery maximum capacitive ? see table load temperature ? 0.02%/c max coefficient xppower.com general efficiency ? see table isolation voltage ? 1500 vdc input to output for optional high isolation versions 3000 vdc input to output add suffix -h to model number 1000 vdc input to case 1000 vdc output to case isolation capacitance ? 1000 pf typical input to output isolation resistance ? 10 9 ? switching frequency ? 330 khz typical power density ? 15 w/in 3 mtbf ? >800 khrs to mil-std-217f at 25 c, gb environmental operating temperature ? -40 c to +100 c (see derating curve) case temperature ? +100 c max storage temperature ? -55 c to +125 c cooling ? convection-cooled operating humidity ? up to 95% rh, non-condensing emc emissions ? en55022 class a conducted esd immunity ? en61000-4-2, level 3, perf criteria b radiated immunity ? en61000-4-3, 10 v/m, perf criteria a eft/burst ? en61000-4-4, level 3 perf criteria a surge ? en61000-4-5, level 2, perf criteria a* conducted immunity ? en61000-4-6, 10 vrms, perf criteria a magnetic field ? en61000-4-8, 1 a/m, perf criteria a * external input capacitor required, 220f/100v (see note 7)
05-aug-13 application notes jce06 models and ratings derating curve notes 1. when one output is set at 100% load and the other varies between 25% & 100% load. 2. measured with 20 mhz bandwidth and 1 f ceramic capacitor across output rails. 3. input current specified at nominal 12 v, 24 v or 48 v input. 4. for optional 3000 vdc isolation add suffix -h to part number e.g. jce0624s12-h 5. for optional metal case version add suffix -m to part number e.g. jce0612s24-m 6. maximum capacitive load is per output 7. for surge immunity, external input capacitor required, 220 f/100 v. 24 v & 48 v input models are perf criteria a, 12 v input models are perf criteria b. mechanical details input voltage output voltage output current input current (1) maximum capacitive load (6) efficiency model number (4,5) no load full load 9-18 vdc 3.3 v 1400 ma 7 ma 513 ma 470 f 75% jce0612s3v3 5.0 v 1200 ma 7 ma 633 ma 470 f 79% jce0612s05 12.0 v 500 ma 10 ma 602 ma 100 f 83% jce0612s12 15.0 v 400 ma 10 ma 595 ma 100 f 84% jce0612s15 24.0 v 250 ma 20 ma 610 ma 47 f 82% jce0612s24 3.3 v 909 ma 10 ma 658 ma 220 f 76% jce0612d03 5.0 v 600 ma 10 ma 625 ma 220 f 80% jce0612d05 12.0 v 250 ma 15 ma 602 ma 100 f 83% jce0612d12 15.0 v 200 ma 20 ma 595 ma 100 f 84% jce0612d15 24.0 v 125 ma 35 ma 617 ma 47 f 81% jce0612d24 18-36 vdc 3.3 v 1400 ma 7 ma 260 ma 470 f 74% jce0624s3v3 5.0 v 1200 ma 7 ma 316 ma 470 f 79% jce0624s05 12.0 v 500 ma 7 ma 301 ma 100 f 83% jce0624s12 15.0 v 400 ma 7 ma 301 ma 100 f 83% jce0624s15 24.0 v 250 ma 10 ma 305 ma 47 f 82% jce0624s24 3.3 v 909 ma 7 ma 329 ma 220 f 76% jce0624d03 5.0 v 600 ma 7 ma 312 ma 220 f 80% jce0624d05 12.0 v 250 ma 10 ma 301 ma 100 f 83% jce0624d12 15.0 v 200 ma 15 ma 298 ma 100 f 84% jce0624d15 24.0 v 125 ma 20 ma 305 ma 47 f 82% jce0624d24 36-75 vdc 3.3 v 1400 ma 7 ma 128 ma 470 f 76% jce0648s3v3 5.0 v 1200 ma 7 ma 154 ma 470 f 82% jce0648s05 12.0 v 500 ma 7 ma 151 ma 100 f 84% jce0648s12 15.0 v 400 ma 7 ma 151 ma 100 f 84% jce0648s15 24.0 v 250 ma 7 ma 151 ma 47 f 84% jce0648s24 3.3 v 909 ma 7 ma 162 ma 220 f 78% JCE0648D03 5.0 v 600 ma 7 ma 154 ma 220 f 82% jce0648d05 12.0 v 250 ma 7 ma 151 ma 100 f 84% jce0648d12 15.0 v 200 ma 7 ma 151 ma 100 f 84% jce0648d15 24.0 v 125 ma 15 ma 158 ma 47 f 80% jce0648d24 printed face 32 11 9 2223 14 16 bottom view 1.25 (31.75) 0.80 (20.32) 0.40 (10.40) 0.60 (15.24) 0.90 (22.86) 0.02 (0.50) 0.02 (0.50) 0.20 (5.08) 0.12 (3.05) pin single dual 2 -vin -vin 3 -vin -vin 9 no pin common 11 n.c. -vout 14 +vout +vout 16 -vout common 22 +vin +vin 23 +vin +vin -40 -20 0 10 20 30 40 50 60 70 80 90 100 20 40 60 80 100 ambient temperature (o) load (%) 0 dcdc notes 1. all dimensions are in inches (mm) 2. weight: 0.03 lbs (13 g) for plastic case, 0.04 lbs (16.5 g) for metal case 3. pin diameter: 0.02 0.002 (0.5 0.005) 4. pin pitch and length tolerance: 0.014 (0.35) 5. case tolerance: 0.02 (0.5) 6. package: 24 pin dil black plastic (ul94v-0) or optional nickel-coated copper. plastic case optional metal case printed face bottom view 1.25 (31.75) 0.90 (22.86) 0.80 (20.32) 0.60 (15.24) dia 0.02 (0.50) 0.10 (2.54) 0.40 (10.40) 0.12 (3.05) min. 0.20 (5.08) 23 22 16 14 23 9 11 ( ) ( )
|
